Belma New 20 x 60 Lathe

Stock:

NEW BELMA GEAR HEAD GAP BED LATHE

SERIAL NO: D046B    MODEL: BELMA-2060

CAPACITY

Swing over Bed                                   20"

Swing over Cross Slide                        12-19/32"

Swing in Gap                                       28-15/16"

Width of Bed                                       11-13/16"

Distance Between Centers                    60"

HEADSTOCK

Spindle Nose                                       Camlock D1-8

Spindle Bore                                        3-1/8"

Spindle Speed Numbers                        12 Steps

Range of Spindle Speed                        16 - 1600 RPM

Taper of Spin a Center                         MT # 3

FEED AND THREADS

Longitudinal Feeds                                0.002" - 0.032" /Rev.

Cross Feeds                                         0.001" - 0.014" /Rev.

Metric Thread                                       0.5 - 14mm

Whitworth Threads                                2 - 56 TPI

Leadscrew Diameter                             1-13/32"

Pitch of Lead screw                               15/64"

TAILSTOCK

Dia. of Tailstock Quill                             2-23/64"

Taper of Tailstock Quill Center                M.T.#4

Travel of Tailstock Quill                          5"

MOTOR

Main Power of Motor                              7.5 HP

Coolant Power of Motor                          1/8 HP, 3PH

Voltage                                                 575V ou 220V/3Ph/60Hz

DIMENSION (L x W x H)                         110" x 40" x 50"

WEIGHT                                                5300 lbs

STANDARD ACCESSORIES: 3-Jaw  Chuck 10" / 4-Jaw Chuck 12" / Face Plate 16" / Steady Rest / Follow Rest / Chip Guard / Threading Dial Indicator / MT #3 Center / 4-Way Toolpost / Taper Turning Attachment

Belma 20x60 gap-bed lathe series is a new product researched and developed by our company in accordance with international standard. The machine has a new appearance, reasonable configuration. It is easy to operate with pleasure, safety and reliability.

The bed of the machine is made of high grade cast iron. The guideway is hardened with super-audio frequency induction and fine ground to obtain high hardness and durable wear resistance. The one-piece base makes the machine highly rigid, and facilitate chip removing and coolant oil receiving.

The optimized design with compact and reasonable structure is adopted in the main driving system. The spindle unit is 3-1/8". The spindle unit is of high rigid, and balanced, and with fine ground gears. The machine performs smooth at high-speed, running with low noise and cutting with good anti-vibration. So the machine is characterized with small overall dimensions, less weight and high rigidity and high accuracy

Pour une cotation

Haut de page